Interne slipmidler ICOM Composites A/S er total leverandør til glasfiber og komposit industrien. Vi har et stort program indenfor interne slipmidler fra en meget seriøs leverandør af interne slipmidler. ICOM Composites A/S servicere store pultrusion og polyeuthan virksomheder på de nordiske markeder. Kontakt os gerne for mere information på telefon 75 50 62 22 eller skriv til os på icom@composites.dk Foto Beskrivelse Info Pris Huskeliste ICOM INT- 270 BESKRIVELSE ICOM Form Treil INT 270 er et internt slipmiddel, der samtidig med slipeffekt sikrer en glat og afvisende overflade på emnerne. ICOM Form Treil INT 270 skal tilsættes polyester under grundig omrøring. Det anbefales at anvende et eksternt slipmiddel ICOM FT 770B sammen med ICOM Form Treil INT 270 ved indkøring af nye forme. ICOM Form Treil INT 270 bevirker en glat, nem og ren afformning. Kontakt os for mere information INT-1846N General: An internal lubricant and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. FRP molds require a surface coating to seal the porosity and maintain the gloss. An effective addition of internal lubricant will not have any adverse effect on the cured resin. The complex polymeric nature of the internal will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. Kontakt os for mere information INT-1947MCH General: A process aid additive designed specifically for pultrusion. Benefits include excellent release, providing optimized line speeds while reducing both pull force and die wear; improved wet out of fiber, fillers and resin. Physical properties of the profile are retained or improved. Tight controls in the manufacture of this product ensure that potential adverse effects from moisture on polyurethane resins are minimized. Secondary operations on PU composites using this product, such as painting, bonding, or plating, are not impaired. Kontakt os for mere information INT-1948MCH General: A Process Aid Additive designed specifically for pultrusion. When PU catalyst and lubricant addition levels are optimized, the system can offer long open resin bath times at ambient yet very rapid cures within the heated die. Line speeds can be maximized with excellent surface profiles while reducing both pull force and die wear. Improved wet-out of fiber, fillers and resin is evidenced by retained or improved physical properties of the profile. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating. Kontakt os for mere information INT-PS 125 General: An internal lubricant and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of internal lubricant will not have any adverse effect on the cured resin. The complex polymeric nature of the internal lubricant will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. Kontakt os for mere information INT-PUL-24 General: A process aid additive designed specifically for pultrusion. The benefit is to optimize line speed while reducing both pull force and die wear. Improves wet out of fiber, fillers and resin flow while reducing viscosity. Physical properties of the profile are retained or improved. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating. Kontakt os for mere information Antal produkter: 6    Tip en ven!    Print